User's Manual

B.
In kit mode press the [ENTER] button
b
Pad Volume (VOL)
: the LCD will display “INST”
Use the [-/+] buttons to select“VOL”.
2. Press [ENTER] button again.
3 There are two ways to choose a drum at this point:
a. Through the following button to select the desired pad.
. Hit the drum that you want to set.
1.
.
14
Begin Playing the Drums
C.
In kit mode press the [ENTER] button
Press [ ] button again, use the pad buttons to select a pad (For example: SNARE).
U Range: 000-127 )
Reverb level (RVRB)
: the LCD will display “INST”.
Use the [-/+] buttons to select the “RVRB”
Enter
se the [-/+] buttons to set a value( .
Press [Enter] button to confirm or press [Back] button to return.
D.
In the k mode, press the [ ] button, use the [+/-] buttons to select“CHRS”
Press [ ] button, use the pad buttons to select a pad (For example: SNARE).
U Range: 000-127 )
Chorus level (CHRS)
it Enter
Enter
se the [-/+] buttons to set a value( .
Press [Enter] button to confirm or press [Back] button to return.
CRASH
TOM1
TOM2
RIDE
RIM
HI-HAT
HI-HAT
CONTROL
SNARE
KICK
TOM3
For example: to select snare voice
ENTER “ ”
ENTER
1. Press [ ] button,
.
3. Press [ ] button again, use the [SNARE] button or hit the snare pad forcefully to
select the voice.
4.
Press the corresponding button of the drums to audition.
5.
the LCD will display INST .
2. Use the [-/+] buttons to select the “LEVL” menu
Use the [-/+] buttons to select new snare voice.
Press [ENTER] button to confirm or press [BACK] button to return.