User's Manual

E. Pan
In the k mode, press the [ ] button, use the [+/-] buttons to select“PAN”
Press [ ] button, use the pad buttons to select a pad (For example: SNARE).
U Range: 000~016 )
(PAN)
it Enter
Enter
se the [-/+] buttons to set a value( .
Press [Enter] button to confirm or press [Back] button to return.
15
Begin Playing the Drums
F. Pitch
In the k mode, press the [ ] button, use the [+/-] buttons to select“PICH”
Press [ ] button, use the pad buttons to select a pad (For example: SNARE).
U Range: -008~008 )
(PICH)
it Enter
Enter
se the [-/+] buttons to set a value( .
Press [Enter] button to confirm or press [Back] button to return.
G. Decay
In the k mode, press the [ ] button, use the [+/-] buttons to select“DCAY”
Press [ ] button, use the pad buttons to select a pad (For example: SNARE).
U Range: -005~000 )
(DCAY)
it Enter
Enter
se the [-/+] buttons to set a value( .
Press [Enter] button to confirm or press [Back] button to return.
H. Copy Drum Kit to New Location (COPY)
Any drum kit can be copied from any one of the 45 kit locations. This is handy if you want to
change the order in which the kits appear for a live performance, for example.
To copy the current drum kit to another location:
1. it Enter
2. Press [Enter] button and use the [-/+] buttons to select one of the drum kit numbers as the
destination. The display will flash the number of the targeted kit（USE1~USE5）.
In the k mode, press the [ ] button, use the [+/-] buttons to select“COPY”.
Note: the next step will overwrite the destination kit. Be sure you have chosen the right
one before you proceed!
Press [Enter] to confirm the destination kit to be overwritten or press [Back] to
exit the Copy function without making any changes.
“ ”
button button
If you pressed [Enter] to execute the Copy function in the previous step, the display will flash
END and exit to the Kit Select page with the new location selected.