User's Manual

Begin Playing the Drums

1. Press the [Setup] button: the LCD will display“TRIG”

2. Use the [-/+] buttons to select the“ EFCT” menu.

3. Press [Enter] button and use the [-/+] buttons to select the “REVB” or “CHRS”

4. Press [Enter] and use the [-/+] buttons to select one of the following options:

REVB: “OFF”“ HAL1”“ HAL2”“ROM1”“ROM2”“ ROM3”“ STG1”

“ STG2”“ PLAT”“ DLAY”“ECHO”.

CHRS: “OFF”“CHR1”“CHR2”“CHR3”“CHR4”“FDBK”“FLG1”

“SDLY”“SDFB”“FLG2”“FLG3”“CLS1”“CHR2”“CHR3”

5. Press [Enter] button again to confirm your choice or press [Back] button to exit to the previous

menu without having changed anything.

B. Defeating the Effects for All Drum Kits (EFCT)

We have added reverb effects to many of the drum kits. However, it's possible you might want

to turn off the reverb for all of the drum kits and process the audio with an external effects

unit. To do this:

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e tu p

C l i c k

S o ngTe m p o

C. Using the Drum Pads as MIDI Triggers Only (LOCL)

You might want to use the pads to trigger another sound source over USB but not hear the drum

module's internal sounds at the same time. This condition is known as "Local Off."

To configure the drum module in this way, do the following:

It can also be

useful if you are triggering the drum module's sounds via USB MIDI and want to eliminate any

double triggering.

1. Press the [Setup] button: the LCD will “TRIG”

2. Use the [-/+] buttons to select the “LOCL” menu.

3. Press [Enter] and use the [-/+] buttons to select either “Off” or “On” depending on

what you want to do. “On” is the normal operating mode: when you play the pads the

internal sounds will trigger. “Off” will not trigger the internal sounds directly.

4. Press [Enter] to confirm the choice, or press [Back] to exit without making any changes.

display