User's Manual

21
Begin Playing the Drums
F. Restoring All Trigger Settings to the Factory Defaults (RSET)
If you have set up your drum kit in a new location, such as on a stage with a drum riser, you
may find that you need to readjust your trigger crosstalk settings, for example. If you would
prefer to start over from the factory trigger settings, follow this procedure:
1. Press the [Setup] button: the LCD will “TRIG”.
2. Use the [-/+] buttons to select the “RSET” menu.
3. Press [Enter] button and use the [-/+] buttons to select “TRIG”or“ALL”.
4.Press [Enter] button again, the display will flash “END” and the settings will have been
restored to their factory defaults.
display
Mode
Parameter/Value
K i t S e l e c t
K i t E d i t
S e tu p
C l i c k
S o ngTe m p o
“TRIG”-----Reset “TRIG” in “SETUP”
“ALL”-----Reset all the setting in “SETUP”
SETUP