User's Manual

Reverb and Chorus Buttons

To apply either effect, press either button. The button will light and the

effect will be heard when the piano is played.

To turn off the effect, press the button of the desired effect again and the

LED light will not light.

REVERB

3. Set the reverb depth by pressing a key on the keyboard to select the

value. See the Appendix for the value ranges.

C4 C5 C6 C7C3

The Reverb and Chorus effects may be applied to each voice individually

and will be retained even when the power is turned off.

CHORUS

Select the depth of the effects

1. Press and hold the effect button.

REVERB

CHORUS

2. While this function is active the LED should blink. You can then release

the button and press a key on the keyboard corresponding to the setting

you want for the reverb depth. It's possible to change the setting by

pressing multiple keys after each other until the right setting is found.