User's Manual

11
Layer Mode
In Layer mode two voices may be played simultaneously, each at selected
volumes.
To enter Layer mode, press and hold the button to select the MAIN sound,
then press the button for LAYER sound, and release. Both the button LED
will light while layered.
GRAND PIANO E.PIANO 1 CHURCH ORGAN
E.PIANO 2 ROCK ORGAN
BRIGHT PIANO
STRINGS VIBRAPHONE GUITAR BANK
BASS HARPSICHORD CHOIR
To layer two sounds in different banks, press and hold simultaniously the
voice button required in the first bank and the bank button. The bank button
LED will flash and the first voice button will be lit. Once the bank button is
flashing can remove your hands from the buttons. Next, select the layered
button from the second bank by pressing the corresponding button. Once
selected this button will blink to indicate its from the second bank while
the instrument from the first bank stays lit. If two voices in the first and
second bank, but on the same button are selected, the buttons should
merely blink. These can also be layered by double-pressing the button in
which case again the button will blink.
GRAND PIANO E.PIANO 1 CHURCH ORGAN
E.PIANO 2 ROCK ORGAN
BRIGHT PIANO
STRINGS VIBRAPHONE GUITAR BANK
BASS HARPSICHORD CHOIR
FUNCTION
TEMPOMETRONOME
To Adjust the of Volume Main Voice in Layer
Press the [METRONOME] and the [TEMPO] buttons together to enter Edit Mode
The LEDs for both buttons will become lit.
，
To turn Layer Mode off, select a single voice button and the other Voice
will be turned off.