Voices Your instrument has 459 voices, include GM standard voices. Selecting a Voice Press the [VOICE/STYLE] button. If the button not illuminated, the instrument will be in VOICE MODE, and the current voice name and number will be displayed on the LCD Display. Use and buttons or [DATA CONTROL] knob to select the desired voice according to the voice list. Eat 3 BATS CONTROL When [VOICE/STYLE] button is not illuminated, you can use the Direct Select Button to select a voice.
Voices Dual Button Press the [DUAL] button to select layer voice mode, two voices will sound simultaneously when you play keyboards. This is useful for creating rich orchestral sounds, for example, the layering of Piano and Strings. Select Dual Voice Press the [DUAL] button and Dual Cursor will flash, use the and buttons or [DATA CONTROL] knob to select the second voice. The second voice needs to be selected within 4 seconds.
Voices Change the Split Point Reference: Split and Chord iw et the Split Voice Volume Reference: Exit the Split Mode Press [SPLIT] again, the Split Cursor will turn off and the Dual mode will be inactive. Sustain Button Press the [SUSTAIN] button, the button will light. The sustain function is the same as a damper pedal. Turn sustain on to sustain notes after the keys are released. RR DAE Sh Press [SUSTAIN] button again to turn sustain off.
Voices Harmony Button Press the [HARMONY] ] button to enter Harmony mode, The Harmony cursor will indicate on the LCD display. The right hand harmony notes are derived from the chords played in the left hand side of the keyboard auto chord section. 2 an] Ard Full Key. Button Press the [FULL KEY] button to enter Full Keyboard mode, the Full Keyboard cursor will light on the display. This feature allows you to play automatic chords over the full length of the keyboard.
Voices ova a PLAT 24 Touch Button The touch function provides 3 different types of keyboard touch sensitivity that can be selected to match different playing styles. Press the [TOUCH] button and use the buttons or turn the the [DATA CONTROL] knob to select the touch sensitivity type in the range Default:02 Touch. When touch is set to off, the same volume is produced no matter how hard or softly you play the keyboard.
Voices f= ND = 815 Effect Button This function allows you to choose and to activate a vast number of effect from the DSP (Digital Signal Processing) section. This DSP Effect function can be used to emulate different room sizes, such as Hall, Room, Stage, etc. Etc. Press the [EFFECT] button to switch this function on or off. When the piano is switched on, the effect default is on.
Function Press the [FUNCTION] button to enter the function menu. Press the [FUNCTION] button repeatedly or turn the the [DATA CONTROL] knob or use the and buttons select the parameter type to be set. Press the [ENTER] button to set the parameter. The option and the parameters are as the follows: Ye Option LCD Display Range Default Dual? on~off off D. Voice? 01~459 06 OTS? on~off off Rune? § Point? 00-87 34 C.Point? 00~87 34 Local? on~off on Trans? ~12~12 00 Tune? -64~63 00 M.Pan? -64~63 00 8.
Function Dual This function is used if the player would like to layer two voices of musical instruments simultaneously; Rich new combinations of voices and music can be created by this function. ‘When the dual function is off, the voice indicated is VOICE R1. When the dual function is on, the voice indicated is VOICE R2.
Function Dual Voice In “Functor” function, press [ENTER] button to confirm, then use the and buttons or the [DATA CONTROL] knob to select “D. Voice?” . = Press [ENTER] button to again and the “DUAL” arrow will flash. use the and buttons or the [DATA CONTROL] knob to select the second voice. 124] O18 One Touch Setting: This function is useful for automatically setting the entire keyboard to optimal sound settings for any style chosen, just by pressing a single button.
Function Press the [ENTER] button to again and use the and buttons or the [DATA CONTROL] knob to select “OTS On” or “OTS Off” . When set “OTS On” , The “OTS” arrow on the LCD will indicate. TED Split and Chord Point In this section, you can set the split or chord point for when your keyboard is in Split or Chord mode. In “Functor” function, press the [ENTER] button to confirm, and use the and buttons or the [DATA CONTROL] knob to select “S. Point?” or “C. Point?” . S.
