User's Manual

Basic Operation Using the Metronome / Twin Piano
16
SELECTING THE BEAT
The metronome may be set for a specific meter, causing it to make a distinguished beep sound to
indicate every first beat of each measure.
Press and hold the METRONOME button for 2 seconds while the metronome is active.
The LED screen will display the current meter of the metronome. Use DATA UP or DOWN
button to set the
metronome to your desired meter.
☞
Pressing both DATA UP and DOWN buttons simultaneously will instantly restore the default metronome meter (4).
☞
The available range of metronome meter is from 1 to 12.
Using the Metronome
START/STOP THE METRONOME
To start the metronome, simply press the
METRONOME
button. Press the METRONOME
button
again to stop the metronome sound.
The piano features a convenient metronome that is ideal for practice.
+
Twin Piano
The twin piano is a tool that divides the piano into two smaller pianos with identical octave range.
This feature allows two people to play the piano in the same octave range simultaneously.
qSelect a Voice.
Select a voice in the normal way. (See the SELECTING VOICE section on page 13.)
w Press the TWIN PIANO button.
The keyboard is split into two sections with identical octave range.
ADJUSTING THE TEMPO OF THE METRONOME
You can set the tempo to a range of 20 ~ 280 beats per minute by using the DATA/TEMPO buttons.
☞
Hold the button for continuous decrementing or incrementing.
☞
Pressing the UP and DOWN buttons simultaneously will instantly restore the default tempo (120).
☞
Metronome volume can be adjusted in the setup mode. (See the SETUP section on page 19.)
SECTION 1 SECTION 2
ePress the TWIN PIANO button again to deactivate the twin piano.
The lamp will be off, indicating that the twin piano is no more active.