User's Manual

Setting Up Your Piano
6
1
Attaching both legs to the pedal board
Assembling the stand
1 Place the legs (b) onto the feet (c) and
fix them using bolts (g) and nuts (h). Put
the Bolt Cap into the bolt hole as shown on
the illustration below.
2 Attach both legs to the Pedal Board (d) using
four Bolts (l) .
2
1 Insert the Back Board(e) in between the
legs and pedal board using 2 Bolts (k) and 4
Screws (j) with 6 Washers (i).
2 After fixing the back panel to the legs,
set the stand upright and make sure the
stand is set up straight.
Setting Up Your Piano