User's Manual

39
Press [SAVE] button, a message xREGSTxxx (x indicates this file's
sequence Num in UDisk. xxx indicates registration file number ) appears,
indicating your Registration Memory Settings are saved to USB Disk, with 24
Registrations stored to a single file.
SAVE
RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2
USB Cursor
Use Registration Data from USB
Insert the USB Disk into the USB terminal. Use [+] and [-] buttons to select
REG file, then press [PLAY/LOAD] button, display shows Load OK .
FILE RECORD PLAY/LOAD
MULTI
DELETE
RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2
24 Registrations will be loaded to the memory store(4*6) on the panel. You
can recall the information you have loaded by pressing M1-M6.
Delete REG File from USB
Insert the USB Disk into the USB terminal. Use [+] and [-] buttons to select
REG file you want to delete, then hold down the [RECORD] button and
press [PLAY/LOAD] button. LCD shows:
FILE RECORD PLAY/LOAD
MULTI
DELETE
RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2
Press [+] button to delete the file.
Press [-] button to cancel.