User's Manual

Functions
-5-
MULTI DISPLAY
MASTER VOLUME MASTER VOLUME
MINMIN MAX MAX
LOWLOW HIGH HIGH
BASS BASS
TREBLETREBLE
To turn the digital piano on and off, use the
POWER switch located in the panel above
the keyboard.
When the piano is turned on, the text GRAND
PIANO will appear in the LCD display.
Connect the piano to a power socket carrying
the correct voltage (indicated on the rear
panel). Use the enclosed power cord.
Never connect the piano to a power socket
that is also supplying power to electric
engines or big domestic appliances. Always
avoid connecting too many electric devices
to the same power socket.
2. Adjusting speaker volume
Use the MASTER VOLUME fader to adjust
the speaker volume. When the fader is
pushed to the far left, the volume will be
turned off.
For maximum volume, push the fader to
the far right.
Start playing at low volume and then increase
the volume to desired level. Do not set the
speaker volume level too high.
3. Adjusting the sound
The BRIGHTNESS fader can be used to
adjust the sound of the piano. If the TREBLE
fader is pushed to the far left the high
frequency of the sound will be decreased,
if it is pushed to the right, the high frequency
will be increased. Pushing the BASS fader
to the left will decrease the bass frequency
while turning it to the right will increase the
bass frequency.
1. Turning on/off the piano