User's Manual

4. Connecting headphones
Two pairs of headphones can be connected
to the Digital Piano. The headphone jacks
are located to the left on the front panel.
The internal loudspeaker system will switch
off automatically when headphones are
connected. Use the MASTER VOLUME
fader to adjust the headphone volume level.
5. LINE OUT Output
The Line Out jack can be used to deliver
the output of the piano to a keyboard am-
plifier, stereo sound system, mixing console
or recording device.
The Line Out level is not affected by the
MASTER VOLUME fader setting.
6. LINE IN Input
Through the LINE IN Input jack an external
sound source, for example a CD-Player,
may be connected to the piano. This makes
it possible to play along to the music played
by the CD-Player.
7. Pedal functions
By using the pedals on the Digital Piano
you can produce the same tonal effects as
on an acoustic piano. Please connect the
pedal unit cable to the PEDAL jack on the
rear panel of the piano.
The sustain pedal (right) functions as a
damper pedal controlling sustain. Press
the pedal to sustain notes after the keys
are released.
The sostenuto pedal (middle) will sustain
notes played when the pedal is pressed
down. Notes played afterwards will not be
sustained (This is also known as “selective sustain”).
The soft pedal (left) controls tone volume. Press down the pedal to decrease the
volume. Release the pedal to return to normal volume.
PHONES 2PHONES 1
LINE OUT
Stereo
System
LINE IN
Stereo
System
SOFT
SOSTENUTO
SUSTAIN
-6-
Functions