Installation Sheet
6 Rinnai Tankless Water Heater Installaon and Operaon Manual
2.1 Items Included
2. About the Water Heater
2.2 Items Needed for Installaon (Not Included)
2.3 Items Not Required But May Be Useful
• Pipe wrenches (x2)
• Phillips Head screwdriver
• Wire cuers
• Gloves
• Safety glasses
• Level
• Soap or gas leak detector soluon
• Approved venng
• Teon tape (recommended) or pipe compound
• Pipe insulaon
• Hammer drill with concrete bits
• Saw
• Threading machine with heads and oiler
• Core drill with diamond head
• Torch set
• Copper tubing cuer
• Steel pipe cuer
• Heat tape
• Electrical wire
• Concrete wall anchors
• Oponal pipe cover
• PVC glue/cement and primer
• 2 conductor 22 AWG wire for controller
• Single gang electrical box
• Wire nuts
• Unions and drain valves
Unpack the Rinnai Tankless Water Heater package and verify the following contents are included. If any items are
missing, contact your local dealer/distributor or call Rinnai Customer Care at 1-800-621-9419.
• Rinnai Tankless Water Heater
• Wall Mounng Bracket (for internal/indoor water heaters only)
• Pressure Relief Valve and Adapter
• Isolaon Valve Kit (for quick isolaon of the water heater for service and/or maintenance)
• Literature Bag
Tankless Water Heater Installaon and Operaon Manual (this manual)
Wall Mounng Bracket Template (for internal/indoor water heaters only)
Model/Serial Number Labels (with printed QR code)
External Pump Cable (for external recirculaon pump control)
Controller Cable (for addional controller connecon)
• Vent screens (x2) and vent screen screws (x2) (for internal/indoor water heaters only). The vent screen
prevents debris and other objects from entering the terminal. One vent screen is for the intake; the other is
for the exhaust
• Self-Tapping Screws (x2) (for internal/indoor water heaters only)