Owners Manual

HOTHOT
COLDCOLD
ON!ON!
14
Rinnai America
FF Models
DELUXE CONTROLLER
Setting The Clock (MC-100V Deluxe Controller ONLY)
The clock is a 12 hour AM/PM style display. To set the time, press the ‘Function’ Button twice
within 10 seconds. Press the
and Buttons to adjust the time. When you get close to
the time you wish to set, press the button intermittently to avoid going further than the desired
time.
Press the ‘Function’ Button again to complete setting the clock and return to normal operation.
Adjusting Temperature
Simply press the
or buttons until the required temperature is displayed on the Digital
Monitor.
To Operate the hot water unit, open any hot water tap. This will automatically light the burner
providing hot water. The red ame of the water heater In Use Indicator
will illuminate on
the Controller.
Once the hot water is running, if the set temperature is either too hot or cold, press the
or
buttons until the desired temperature is reached.
Setting The Sound Volume
To do this, press the Function Button, the default voice prompt sound volume is medium, each
subsequent press of the
and Button will cycle through the available volume settings in
the following order: High Voice - Off Voice (beep) - Off Sound (no beep) - Low Voice - Medium
Voice.
TEMPERATURE CANNOT BE
ADJUSTED EXCEPT BETWEEN
98
O
F AND 110
O
F WHEN ANY
HOT WATER TAP IS OPEN.