Product Brochure

ManualsBrandsRinnai ManualsPlumbing3 in./5 in. Plastic Condensing Roof Discharge Termination Vent Kit for Rinnai SE Tankless Water Heaters

(PPs) - Polypropylene

Ø3/5 (80/125) Ubbink Vent Components

• For use on Rinnai CONDENSING water heaters only.

• Do not combine the vent components illustrated on this

page with any other vent components.

• Material of Inner/Exhaust - Polypropylene, Flame Retardant

(ULC S636 Gas Vent-BH Class IIC 110°C/230°F)

• Material of Outer/Combuson Air - Plasc.

• Vent components consist of an outer plasc vent for air

intake Ø5 in. (80 mm) and an inner polypropylene vent for

the exhaust gases Ø3 in. (125 mm).

(PPs) POLYPROPYLENE VENT COMPONENTS

Refer to the Rinnai Water Heater Installaon and Operaon manual for complete installaon details and requirements.

Rinnai is connually updang and improving products; therefore, specicaons are subject to change without prior noce. Local,

state, provincial and federal codes must be adhered to prior to installaon.

38” (965mm)

20.3” (516mm)

3/5 (80/125) Roof

Terminaon

Extension Kit

Part #: 185344PP

Maximum Wall

thickness “L”

Part Number

8.7” (221 mm) 223174PP

12” (305 mm) 223176PP

21” (533 mm) 223177PP

L”

3/5 (80/125) Condensing Horizontal

Terminaon Kit

(terminaon, elbow, rubber wall plates)

3/5 (80/125) Condensing

45 Degree Elbow (Qty. 2)

Part #: 224077PP

4.7”

(119 mm)

5.5” (130 mm )

3/5 (80/125)Condensing

90 Degree Elbow

Part #: 224078PP

2” (53 mm)

5.2” (32 mm)

L”

3/5 (80/125) Condensing Horizontal

Terminaon Diverter Kit 19” (483 mm)

Part #: 223186PP

3/5 (80/125) Rubber Wall Plate

Part No.: 710342(White)

Part No.: 710602 (Black)

3/5 (80/125) Thimble

Part #: 224045

15.75” (400 mm)

3/5 (80/125) Vent Support Bracket

Part #: 224049

8.6”

218 mm

Ø5.0” (127 mm)

3/5 (80/125) Horizontal—

Flashing Panel

Part #: 102000012

12.25”

(311 mm)

3/5 (80/125) Condensing

Raised Horizontal

Terminaon Kit “Snorkel”

Part #: 224047PP

Kit Includes:

• 14.2” (361mm) Vent Extension

(Qty. 3)

• 90° Elbow

• 19.5” (495mm) Vent Pipe Extension

• Special wall terminal

• Cover

3/5 (80/125) Condensing

Roof Discharge

Terminaon 20” above Roof

Part #: 184162PP

25” (635 mm)

38” (203.2 mm)

3/5 (80/125) Condensing Roof

Discharge Terminaon

25” (635 mm) above Roof

Part #: 184228PP

(for 6” B-Vent Flashing)

3/5 (80/125) Condensing Vent

Pipe Extension

Length “L” Part Number

10” (254 mm) 224087PP

19.5” (241 mm) 224079PP

39” (991 mm) 224080PP

Flashing for Metal Roof*

Part #: 242141

Roof Flashing Assembly- Flat*

Part #: 146141

Universal Bug Guard*

Part #: 224042

*Fits 2x4 or 2x6

Wall Construcon

Pipe Clamp

Universal Plasc*

Part #: 169044

4.15”

(105 mm)

Roof Flashing*

Roof Pitch Part No.

Shingle Roofs

Part No.

Tile Roofs

1/12 to 6/12 189950 50171949

6/12 to 12/12 189951 50171961

8/12 to 16/12 189952 50171954

3/5 (80/125) Pipe Clamp

Metal

Part #: 169043

*Components are universal

for use with 2/4(50/100) and

3/5 (80/125) components.

3/5 (80/125) Condensing

Terminaon Extension

Part #: 185346PP

Rinnai Corporaon • 103 Internaonal Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-829-1666 • www.rinnai.us

8.8”

(223.5 mm)