Manualshelf

Venting Installation Instructions

ManualsBrandsRinnai ManualsPlumbing3 in. / 5 in. x 12 in. Plastic Condensing Horizonatal Termination Vent Kit for Rinnai SE and SE+ Tankless Water Heaters
12345678910
D = 5.5" (140 mm)
Cover the top of the heater
to prevent debris from
entering when cutting
NOTE
D = 5.5" (140 mm)
10
Installation Instructions
Rolux
®
Horizontal Discharge Vent System
1
2
Steps:
Case A: Place the horizontal Discharge Adapter on the appliance.
Case B: Place the 90° Vent Pipe Elbow on the appliance.
- Mark position on wall
- Or use template provided with water heater
- Cut hole, covering the top of the water heater to prevent debris from entering
Identify the vent location
Measure dimension to fit
Reference page 4 of these installation
instructions for the acceptable pitch direction.
CASE A:
Installation with Male Appliance Top
Case B:
Installation With Female Appliance Top
White Outer Pipe
Metal Inner Pipe