Spec Sheet

ManualsBrandsRinnai ManualsHeater AccessoriesHydronic Air Handler- 40 MBH No Circulator

AH083CP AH084CP AH125CP AH166CP AH206CP

Installation Indoor (approved for manufactured housing and mobile homes)

Suitable for Potable Water Systems Yes

Configurations

• Vertical: Upflow with bottom or side (left or right side) return

• Horizontal: Upflow with bottom return

Circulation Pump Included Yes (Factory Installed)

Product Weight - lb. (kg) (approximate) 66 (30) 66 (30) 66 (30) 71 (32) 83 (38)

Cabinet Construction

Embossed cabinet in heavy gauge galvanized steel to prevent

corrosion. Cabinet lined with 5/8 in. foil faced insulation.

Nominal CFM (Cubic Feet/Minute) 800 800 1,200 1,600 2,000

Nominal Output Btu/hr at 140°F

30,000 40,000 50,000 60,000 60,000

Rated Voltage 120 V, 60 Hz, 1 Ph

Transformer Size and Type 40 VA, Class 2

Blower Wheel (Diameter x Width) 9x6 in. 9x6 in. 10x8 in. 10x8 in. 10x10 in.

Blower Motor Type 3-Speed PSC

Blower Motor Hot Water Coil Rows 3 4 3

Blower Motor Coil Material Copper Coil, UV Resistant Pan

Blower Motor Horsepower (HP) 1/3 1/3 1/2 3/4 3/4

Blower Full Load Amps (FLA) 5.3 5.3 7.1 7.5 10.5

Water Connection 3/4 in. Sweat

Pump Voltage, Amps 120 V, 1.4 Amps

Control Board

Factory Installed. Freeze protection activates at 40°F and deactivates at

70°F. Thermostat connections. 60-second time delay for blower

activation. Pump timer circulates water for one minute every six hours

to prevent stagnation of water in the system. Boiler activation dry

contact. 24V AC isolation valve control.

Certifications ETL Listed

AH083P AH084P AH125P AH166P AH206P