Installation Manual
4           Canadian Air Handler Installation and Operation Manual  
Indicates an imminently hazardous 
situation which, if not avoided, will result 
in personal injury or death.  
Indicates a potentially hazardous situation 
which, if not avoided, could result in personal 
injury or death. 
Indicates a potentially hazardous situation 
which, if not avoided, could result in minor 
or moderate injury. It may also be used to 
alert against unsafe practices. 
   DANGER 
 WARNING 
This manual contains the following important 
safety symbols. Always read and obey all safety 
messages.  
Safety alert symbol. Alerts you to 
potential hazards that can kill or 
hurt you and others. 
 CAUTION 
The following precautions apply to the installer 
and consumer. Read and follow all instructions in 
this section.  
•  Before any work is undertaken, it is 
imperative to observe all precautions as 
stated in this manual. 
•  Wear safety glasses and work gloves. 
Before installing or servicing the air handler, 
turn off the power to unit. There may be more 
than one disconnect switch. Electrical shock 
can cause personal injury or death. 
 WARNING 
•  Suitable fire extinguishing equipment should 
be immediately available in the work area 
and be maintained in a state of readiness for 
instant use. 
•  Do not use this air handler if any part has 
been under water. Immediately call a 
licensed professional to inspect the air 
handler and replace any part that has been 
under water. 
•  Do not use substitute materials. Use only 
parts certified for the air handler. 
•  Do not use an extension cord or adapter plug 
with this air handler. 
•  Any alteration to the air handler can be 
dangerous and will void the warranty. 
•  This air handler must be installed indoors. 
•  Improper installation, modification, service, 
maintenance or use of the air handler can 
cause electrical shock, burns or other 
conditions which may cause personal injury 
or property damage.  
•  It is recommended that a trained and 
qualified professional who has attended a 
Rinnai installation training class complete 
your installation. 
•  Read these installation instructions carefully 
and adhere to all warning and caution 
statements. Consult local building codes, 
Occupational Safety and Health 
Administration (OSHA), and National 
Electrical Code (NEC) for special 
requirements. 










