Operation & Installation Manual Electric Panel Heaters Models: DEPH-10DTW, DEPH-15DTW & DEPH-22DTW For safe, reliable operation and optimum performance this appliance must be installed, operated and maintained in accordance with these instructions. Read these instructions thoroughly before attempting installation and operation. Keep these instructions handy for future reference.
BEFORE PROCEEDING WITH THE OPERATION OR INSTALLATION OF YOUR NEW HEATER PLEASE READ THIS MANUAL THOROUGHLY AND GAIN A FULL UNDERSTANDING OF THE REQUIREMENTS, FEATURES AND OPERATION OF YOUR NEW APPLIANCE.
TABLE OF CONTENTS WARRANTY, FEATURES & SPECIFICATIONS ................................................................................5 WARRANTY ..................................................................................................................................................... 5 FEATURES....................................................................................................................................................... 5 SPECIFICATIONS ......................................
This page is intentionally blank Rinnai 4 DEPH_OIM
WARRANTY, FEATURES & SPECIFICATIONS WARRANTY The benefits to the consumer given by this warranty are in addition to all other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other loss or damage.
SAFETY & IMPORTANT POINTS UNPACKING THE APPLIANCE If any damage is evident DO NOT INSTALL or OPERATE and contact your supplier for advice. WHAT’S IN THE BOX The package should contain: Heater fitted with flexible cord and plug. A plastic bag containing the Operating and Installation Instructions, wall mounting screws and mounting brackets. A box containing four castors, two castor feet and a screwdriver.
HOW TO OPERATE THE HEATER GENERAL DESIGN LAYOUT 18 8 14 7 18 9 10 11 12 13 6 5 B 1 2 3 A 4 18 16 17 18 15 A Control panel console B Digital LED display 1 POWER `ON´ / `OFF´ button 2 MODE button, temperature/timer setting 3 `UP´ button 4 `DOWN´ button 5 Temperature / Timer display 6 Power indicator 7 Heater Operation indicator (Red) 8 Delay Off Timer Set indicator (Green) 9 Constant Frost protection indicator 10 Lock indicator 11 Degrees celsius indicator (illuminates wh
HOW TO OPERATE THE HEATER 7 6 5 11 B 1 2 3 A 4 14 CONNECTING THE POWER Plug the heater into a power outlet and turn the power outlet on. Once power is connected the rising start up chime will sound and the power indicator 6 will illuminate on the Digital LED display B to show the heater is now in standby mode. OPERATION 1. Press the POWER button 1 on the control panel console A once to start heating operation, a second rising chime will sound.
HOW TO OPERATE THE HEATER 8 7 6 5 12 13 B 1 2 3 A 4 14 DELAY OFF TIMER OPERATION In addition to temperature controlled operation the heater can also be operated via the use of a delay off timer. This allows the user to program the heater to operate for a set time period, after which the heater will be returned back to standby mode. 1. Set the desired operating temperature as per steps 1 through 3 “CONNECTING THE POWER” on page 8. 2. After setting the desired temperature press the MODE button 2 twice.
HOW TO OPERATE THE HEATER 7 9 10 6 5 13 B 1 2 3 A 4 14 ANTI-FROST PROTECTION FUNCTION If the set temperature 5 is set to 5 °C then the constant frost protection program will be activated and the constant frost protection (snowflake symbol) indicator 9 will be illuminated. This is useful during winter in alpine areas where the ambient temperature is likely to fall below 5° C.
CARE AND MAINTENANCE CARE OF THE HEATER Due to the ‘natural convection’ operating principle it is normal that some dust and fluff may build up at the air inlet and air outlet louvres over time. This will reduce operating effectiveness and may result in the appliance overheating if left for too long. DO NOT use solvents to clean any parts. To remove dust and clean the appliance: 1. Unplug the electric plug of the heater from the socket outlet before commencing cleaning. 2. Allow to cool down. 3.
INSTALLATION GENERAL This heater is suitable for Do It Yourself installation. It can be either wall mounted (fixed installation) or freestanding by mounting castors in accordance with these instructions. A phillips head screwdriver is included for freestanding installation. For wall installation other tools and hardware may be required, depending on the wall material.
INSTALLATION 3. Attach the supplied right angle mounting brackets to the bottom of the heater (front hole of bracket) using the rear most of the pre-installed case screws as shown below. Use the rear most of the pre-installed case screws Install right angle mounting bracket using the front hole 4. Hang the heater using the slots located on the back of the appliance and secure the right angle mounting brackets to the wall with appropriate fixings as shown.
INSTALLATION FREESTANDING INSTALLATION C A A B Front of castor assembly B D E A B Back of heater 1. Be sure heater is unplugged before attempting to install the castor components. 2. Assemble the 2 castors A to the each castor foot B by pushing the metal shaft fully home. 3. Place the heater in an ‘upside down’ position with the back of the heater facing you. 4. Remove the two of the pre-installed case screws C from the base of the appliance D . 5.
NOTES Rinnai 15 DEPH_OIM
CONTACT INFORMATION Australia Pty. Ltd. Product Sales and Service - National Phone: 1300 555 545* Fax: 1300 555 655* Technical Helpline and Spare Parts National (Mon-Fri 8am - 5.30pm EST) Phone: 1300 555 545* Fax: 1300 300 141* ABN 74 005 138 769 Head Office 100 Atlantic Drive, Keysborough VIC 3173 *Cost of a local call higher from mobile or public phones. E-mail: enquiry@rinnai.com.au P.O. Box 460 Braeside, Victoria 3195 For further information visit: www.rinnai.com.
