Manualshelf

Pipe Cover PCD03 Installation Instructions

ManualsBrandsRinnai ManualsWater HeatersTankless Water Heater Installation Kit
1
6
13
12
11
5
8
10
10
8
Top Frame
M4X12
M4X8
M5X8
ø4.8X32
10pcs.
2pcs.
2pcs.
2pcs.
6pcs.
4pcs.
2pcs.
2pcs.
1pc.
1pc.
1pc.
2pcs.
1pc.
1
Top Frame
4
Right Plate
6
Metal Bracket
10
Plastic Washer
2
Bottom Frame
7
Clip
11
Screw
12
Screw
3
Left Plate
5
Front Panel
8
Screw
9
Screw
13
Wall Anchor
M4
A
B
B
3
1
2
2
4
7
9
9
10
10
(1) Assemble the Top Frame 1 to the Left and Right Plates 3 &
4 with clip 7 . Secure these parts with screws and plastic
washers 9 &
10
.
(2) Secure the two Bottom Frames 2 to the Left and Right Plates
3 & 4 with screws and plastic washers 9 &
10
.
• This pipe cover box will fit any LS model except for the R63-LSe and R98-LS series.
• For your safety, always wear safety glasses and gloves.
• To use this product correctly and safely, please read and follow these assembly and installation
instructions.
• Carefully unpack and identify each component before attempting to assemble.
Refer to Parts List.
(1) Remove the mounting screws A & B from the bottom and
sides of the appliance.
(2) Install the two Metal Brackets 6 to the bottom of the
appliance with the screws A removed in step 1.
(3) Slide the Pipe Cover assembly onto the bottom of the
appliance. Align the mounting holes and temporarily mount
the Pipe Cover with the screws B removed from the sides
of the appliance in step 1, and screws
11
.
(4) Loosen the screws on the "back" Bottom Frame.
Then mark the locations to attach the Pipe Cover to the wall.
(5) Remove the Pipe Cover and drill two holes in the wall as
marked. For drywall, drill two 3/16-in. holes (other wall
material may require alternate mounting details).
(6) Gently tap the wall anchors
13
into the drilled holes until
flush with the wall.
(7) Slide the Pipe Cover assembly onto the bottom of the
appliance. Align the mounting holes and attach the Pipe
Cover with the screws B removed from the sides of the
appliance in step 1, and screws
11
.
(8) Attach the Pipe Cover to the wall with two screws
12
.
(9) Attach the Front Panel 5 to the Pipe Cover with screws
and plastic washers 8 &
10
.
(10)With the Pipe Cover flush with the
appliance, tighten the screws on the
"back" Bottom Frame.
Pipe Cover Installation Instruction
To the installer
Model
Parts List
Pipe Cover Assembly Instructions
Pipe Cover Installation
U287-1040(00)
2007/7/11 U287-1040(00)1 /  2002
0 7 0 0 0 0 1 2 5 9 0 7 4 5
PCD03-SM2

Summary of content (1 pages)