Specifications

Installation & Servicing Instructions E-Range
4
1 Introduction
These instructions describe the functioning, installation, use and primary maintenanceof
Rinnaï central heating boilers for the United Kingdom and Ireland. Where necessary
thedifferent regulations for each country are separately described.
This appliance may only be installed by someone certified competent to do so. At thetime
of printing the only people deemed competent to install this appliance are those thatare
CORGI registered for this type of appliance in this type of location who have a currentACS
certificate.It is advisable to read these instructions thoroughly, well in advance of
installation. Separate instructions for use are supplied with the boiler for users of Rinnai
central heating boilers. Rinnai is not liable for the consequences of mistakes or
shortcomings which have found their way into the installation instructions or user’s manual.
Further, Rinnai reserves the right to alter its products without prior notification.
When delivering the boiler, give the customer clear instructions concerning its
use; present the customer with the user’s manual and card.
Each boiler is fitted with an identification plate. Consult the details on this plate to verify
whether the boiler is compliant with its intended location, e.g.: gas type, power source
and exhaust classification.
Relevant Installation, Service and User manuals:
- Rinnai Flue system guide
- Rinnai Digital room thermostat
2 Regulations
The following regulations apply to installation of Rinnai central heating boilers:
Legislation and Regulations.
Gas Safety (Installation and Use). All gas appliances must by law, be installed by a
competent person, eg. Members of CORGI and in accordance with the current Gas Safety
Regulation. Failure to install appliance correctly could lead to prosecution.
In addition to the above regulations this appliance must be installed in compliance with the
current IEE Regulations, the Building Standards (Scotland Consolidation) Regulations.
Regulations and bye laws of the Local Water Authority and the Current Health and Safety
Regulation.
Ireland:
- Irish standard 813
- Domestic gas installations
The current, Electricity at Work Regulation must be complied with and also be in
accordance with the relevant and current editions of the British Standards.
The Rinnai E boiler is a certified appliance and must not be modified or installed in any
way contrary to this Installation Manual.
Manufacturers instructions must not be taken in any way as overriding statutory
obligations.
The Rinnai E is a central heating system boiler. These boilers must be connected
according to these instructions and all installation norms in respect of the part of the boiler
to be connected.