Submittal Sheet

ManualsBrandsRinnai ManualsTankless Gas Water HeatersE60SRP

E60SR Condensing Boiler

E60SR-SP-2 8/2017

SPECIFICATIONS

Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior

notice. Local, state, provincial and federal codes must be adhered to prior to installation.

Standard Features

 Factory Installed Boiler/System Modulating Pump

 Onboard Outdoor Reset Control System with Sensor Standard

 Integrated Control for External Domestic Hot Water Indirect Tank

 Modulating Ceramic Premix Burner

 4.4:1 Turndown Ratio

 Spark Ignition

 Exceeds SCAQMD 1146.2 Low NO

Requirements

 Stainless Steel Water Tube Condensing Heat Exchanger

 Concentric Venting System

 Twin Pipe Venting Adapters Included

 Approved for Room and Closet Installations (Zero Clearance to

Combustibles)

Optional Accessories

 RS100 Single Zone Controller

 Flue Gas Temperature Sensor

 Room Air Filter

 Low Loss Header Plumbing Kit

 Low Loss Header Side Mount Kit

 DHW Indirect Tank Temperature Sensor

General Specifications

Water Content 0.9 Gal / 3.4 L

Max. Supply Boiler Temperature 176 °F / 80 °C

Max Operating Pressure 45 psi / 310 kPa

Relief Valve Rating 375 MBH / 110 kWh

Relief Valve Pressure Rating 30 psi / 207 kPa

Unit Weight 75 lbs / 34 kg

Min Inlet Gas Pressure NG 4.0" WC / 10.0 mbar

Max Inlet Gas Pressure NG 10.5" WC / 26.2 mbar

Min Inlet Gas Pressure LP 8.0" WC / 19.9 mbar

Max Inlet Gas Pressure LP 13.5” WC / 33.6 mbar

Electrical Voltage Mains 120 V / 60 Hz

Electrical Voltage Controls 24 V

Power Consumption Max Load 145 W

Power Consumption Standby Load 14 W

Recommended Circuit Breaker Rating 15 A

Sound Level 39 dB

Performance Specifications

Fuel Types NG and LP

Input (Heating) 60 MBH / 17.6 kWh

Heating Capacity 56 MBH / 16.4 kWh

Input (Domestic Hot Water) N/A

Minimum Input

NG: 13.6 MBH / 4.0 kWh

LP: 37.0 MBH / 10.9 kWh

Turndown Ratio 4.4:1 / 1.6:1 TDR

System Pump Model UPER 20-58

Max Head Pressure at Flow

Rate

7.3 ft at 5.0 GPM

2.2 m at 18.9 LPM

AFUE 95.5%

DHW Flow Rate 75°F ΔT N/A

DHW Minimum Activation N/A

Flow Restrictor Color N/A

Max Equivalent Exhaust Vent

Length

100 ft / 30.5 m

Max Equivalent Combustion

Air Vent Length

100 ft / 30.5 m

Approved Venting Materials

Polypropylene, Stainless Steel,

PVC, CPVC

Summary of content (2 pages)

PAGE 1
E60SR Condensing Boiler Standard Features Optional Accessories                  Factory Installed Boiler/System Modulating Pump Onboard Outdoor Reset Control System with Sensor Standard Integrated Control for External Domestic Hot Water Indirect Tank Modulating Ceramic Premix Burner 4.4:1 Turndown Ratio Spark Ignition Exceeds SCAQMD 1146.
PAGE 2
E60SR Condensing Boiler DIMENSIONS Connection for combustion air supply and vent system A Height 25.6” / 650 mm B Width 19.7” / 500 mm C Depth 15.6” / 395 mm D Left Side / Vent 13.2” / 335 mm E Center to Center / Vent & Air Supply 4.7” / 120 mm F Back / Vent 10.6” / 270 mm G Left Side / Gas Pipe 9.8” / 250 mm H Left Side / Supply Pipe 5.9” / 150 mm J Left Side / Return Pipe 13.8” / 350 mm K Left Side / Condensate Pipe 15.