Submittal Sheet

E60SR Condensing Boiler
Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: [phone] • www.rinnai.us
DIMENSIONS
A Height
25.6” / 650 mm
B Width 19.7” / 500 mm
C Depth 15.6” / 395 mm
D Left Side / Vent 13.2” / 335 mm
E Center to Center / Vent & Air Supply 4.7” / 120 mm
F Back / Vent 10.6” / 270 mm
G Left Side / Gas Pipe 9.8” / 250 mm
H Left Side / Supply Pipe 5.9” / 150 mm
J Left Side / Return Pipe 13.8” / 350 mm
K Left Side / Condensate Pipe 15.9” / 405 mm
P Pipe Length of G 1” / 26 mm
Q Pipe Length of C 1.6” / 40 mm
S Back / Center of Pipe C 1” / 26 mm
T Back / Center of Pipe F, G, and R 1.9” / 49 mm
V
Pipe Length Concentric Vent and Air
Supply
7” / 177 mm
Minimum required
clearance to
combustibles and
non-combustibles
Recommended
service
clearances
Top 2” / 50 mm 10” / 250 mm
Back 0 0
Front 6” / 150 mm 24” / 600 mm
Left side 2” / 50 mm 2” / 50 mm
Right side 2” / 50 mm 2” / 50 mm
Floor / Ground 0 12” / 300 mm
Vent 0 0
Clearances
Additional Information:
 If the boiler is to be installed in a system that utilizes zone
circulators and not zone valves a low loss header plumbing
kit is required to be installed.
 If the pressure drop in the loop/system is greater than the
available head pressure from the boiler circulator a Low Loss
Header Plumbing kit part number: 804000061 must be used.
 If the boiler is installed in a system with zone valves and the
constant recirculation function is activated then a differential
pressure bypass valve or a low loss header plumbing kit is
required to be installed.
E60SR-SP-2 8/2017
© 2017 Rinnai Corporation
Connection for combustion
air supply and vent system
Shipping Specifications:
 Shipping Weight: 86 lbs (39 Kg)
 Shipping Dimensions: 34” x 17” x 22” (86 cm x 44 cm x 55 cm)