Installation manual

ManualsBrandsRinnai ManualsDomestic AppliancesEfficiency24

Table Of Contents

Compatible Rinnai water heater models:

Infinity XR32 HD-200

Infinity XR26 HD-200i

Infinity XR24 HD-250

Infinity XR20 HD-250i

Infinity XR18

Infinity XR16

Infinity XR26i

Infinity XRPlus 26

Infinity XRPlus 20

Efficiency 24

Compatible Rinnai water controller:

Universal wired controller MC-91

Wireless controller MC502S

MC-100V & BC-100V

Operation / Installation Manual

A guide on how to use and install Rinnai deluxe water controllers

This guide is for the use and installation of

Rinnai Deluxe water controller models

MC-100V and BC-100V.

These instructions must be used in conjunction

with the Rinnai Water Heater Operation /

Installation Manual supplied with Rinnai water

heaters.

These water controllers are compatible only

with the Rinnai water heater and other water

controller models shown.

Refer to the table located on page 1 of this

manual to confirm the maximum number and

combination of controllers that can be fitted to

your Rinnai water heater model.

This appliance shall be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000, AS/NZS 3500 & NZS 5261

• Local Regulations and Municipal Building Codes

This appliance must be installed, serviced and removed by an Authorised Person.

Summary of content (16 pages)

PAGE 1
MC-100V & BC-100V Operation / Installation Manual A guide on how to use and install Rinnai deluxe water controllers This guide is for the use and installation of Rinnai Deluxe water controller models MC-100V and BC-100V. These water controllers are compatible only with the Rinnai water heater and other water controller models shown.
PAGE 2
REGULATORY INFORMATION Controllers and water heaters must be installed correctly by an authorised person. The installation of gas, water, and electricity must conform to local regulations. The installation must also comply with the instructions supplied by Rinnai. Please keep this instruction booklet in a safe place for future reference. All dimensions referred to in these instructions are in millimetres, unless otherwise specified.
PAGE 3
OPERATION MANUAL REGULATORY INFORMATION...................................................................................i WARNING ABOUT HOT WATER ................................................................................i GENERAL WATER CONTROLLER INFORMATION .................................................1 DELUXE WATER CONTROLLERS ............................................................................2 ABOUT THE DELUXE KITCHEN WATER CONTROLLER (MC-100V) .......................................
PAGE 4
GENERAL WATER CONTROLLER INFORMATION Temperature water controllers allow precise temperature control by the user. When used correctly, the hot water unit will deliver the selected temperature, even when the water flow is varied, or more than one tap is in use. Each water controller can be individually programmed, however the water heater can only deliver one set temperature at any time.
PAGE 5
DELUXE WATER CONTROLLERS ABOUT THE DELUXE KITCHEN WATER CONTROLLER (MC-100V) WATER TEMPERATURE INDICATOR Indicates the selected hot water temperature. SHOWER SAVER / BATH FILL INDICATOR DIGITAL MONITOR Indicates that the Shower Saver / Bath Fill function is operating. UP AND DOWN BUTTONS WATER HEATER 'In Use' INDICATOR When in Normal mode these buttons are used to select the water temperature. Indicates that the water heater is in operation and delivering hot water.
PAGE 6
DELUXE WATER CONTROLLERS To return to normal mode press the 'Mode' button once,if no buttons are pressed for a period of approximately 10 seconds the controller will return to normal mode. The time is always displayed regardless of whether the Water Controller is turned ON or OFF. NOTE The clock may need reseting if power to the water heater unit is disrupted due to a power failure or if the power is switched off over a prolonged period.
PAGE 7
DELUXE WATER CONTROLLERS ABOUT THE DELUXE BATHROOM WATER CONTROLLER (BC-100V) WATER TEMPERATURE INDICATOR Indicates the selected hot water temperature. WATER HEATER 'In Use' INDICATOR Indicates that the water heater is in operation and delivering hot water. TRANSFER BUTTON Used to transfer control priority between the temperature controllers. The controller with priority has command of the hot water delivery temperature. This button is illuminated when this controller has priority.
PAGE 8
DELUXE WATER CONTROLLERS Setting The Clock The clock is a 12 hour AM/PM style display. To set the time press the 'Clock' button once, this places the controller into clock setting mode, in the digital monitor the clock digits will flash, if this is the first time the clock has been set the starting time will be AM 12:00. Use the ‘Temperature’ or buttons to select the desired time, holding these buttons down continuously cycles the digits.
PAGE 9
DELUXE WATER CONTROLLERS OPERATING THE SHOWER SAVER / BATH FILL FUNCTION The 'Shower Saver / Bath Fill' function allows a preset water volume and temperature to be selected and run automatically. NOTE No voice prompts will be available if the ‘Voice OFF’ or ‘Sound OFF’ options are selected. With ‘Sound OFF’ there will also be no audible tones.
PAGE 10
DELUXE WATER CONTROLLERS The voice prompt will say "The hot water system is ready. Open the hot water tap”. Open the hot water tap for the relevant shower or bath. ON! COLD The ‘In Use’ indicator will illuminate on all deluxe water controllers and the shower will run or the bath will start to fill. HOT To Stop Shower Saver / Bath Fill Operation If you wish to stop the water flow whilst the shower saver / bath fill function is in operation, simply press the 'Shower Saver / Bath fill' button.
PAGE 11
WATER CONTROLLER INSTALLATION WATER CONTROLLERS Water Controllers are available as an optional extra. Universal and Deluxe Controller can be used together and will function as described in the Operation Section of this manual. Please refer to page 1 to confirm the maximum number and combination of controllers that can be fitted. NOTE Other manufacturers water controllers are NOT compatible with Rinnai water heaters. These water controllers must not be used with any Solar Boost water heater.
PAGE 12
WATER CONTROLLER INSTALLATION 5. Carefully remove face plate from water controller, using a screw driver. (Fig. 2) 6. Connect the controller cable to the kitchen water controller as shown in Fig 3. At this point cables from other controllers (if fitted) may also be connected to the kitchen water terminals (Fig. 4) eliminating the need for multiple cable runs directly to the water heater. Water controllers are not polarity sensitive.
PAGE 13
WATER CONTROLLER INSTALLATION CONNECTING COMMUNICATION CABLES TO THE WATER HEATER Communication cables connect the water heater to water controllers and operate at an extra low voltage (12 Volts DC) which is supplied from the water heater. Communication cables are supplied with the water controllers (15m) and are fitted with spade terminals for connection to water heater. Up to two cables can be connected directly to the cable connector at the water heater. Extension cables are available from Rinnai.
PAGE 14
NOTES Rinnai New Zealand 11 Installation Manual:01-07
PAGE 15
NOTES Rinnai New Zealand 12 Installation Manual:01-7
PAGE 16
CONTACT INFORMATION Customer Contacts Consumer Enquiries: 0800 746624 Installer Enquiries: 0800 86746624 (0800 RINNAI) (0800 TORINNAI) Rinnai New Zealand Limited 691 Mt. Albert Road, PO Box 24068 Royal Oak, Auckland Email: info@rinnai.co.nz www.rinnai.co.nz U220-1149(00) 2008.