Specifications

Fan Convector Manual 17
Operang the Timer(s) (FC510):
Press the On Timer buon . The On Time indicator will
illuminate and the Combuson indicator will be illumi-
nated green to conrm that the heater is awaing for
the Delay “ON” me period to pass before commenc-
ing operaon. The Delay On Timer indicator will also
illuminate and the current Delay On Time period will
be displayed on the Digital (Temp / Time) display for
10 seconds. While displayed, the Delay “ON” me can
be adjusted by pressing the Up or Down buons . A
delay me of up to 9½ hours can be set in increments
of 30 minutes and a delay me of up to 24 hours in
increments of 60 minutes. When the programmed
Delay “ON” me period has passed, the heater will
automacally begin operaon.
The Timer feature allows you to delay the start me
of the heater for up to 24 hours.
NOTE
The heater will connue to operate for a period of 60
minutes. On Timer operaon can be cancelled by
pressing either the ON/OFF buon or the O Timer
buon . The delay ‘On’ me last programmed is
stored in the memory and will be the default unl it is
re-adjusted.
If the On Timer buon is pressed while the heater is
in operaon the On Timer will override manual
operaon.
Operang the On Timer
Operang the O Timer
The O Timer allows you to set a 60 minute delay
before the heater will automacally turn o.
To operate, press the O Timer buon . The O
Timer indicator will illuminate and the Combuson
indicator will be illuminated red to conrm that the
heater will connue operaon unl the Delay ‘o’
me period has passed aer which it will stop. The
Delay O me is 60 minutes. When this me has
passed, the heater will automacally stop operaon
and the O Timer indicator will go out.
During O Timer operaon full manual control of the
heater is available.
NOTE
Aer the O Timer operaon is completed, press the
On/O buon twice to restart the heater.
The O Timer and On Timer(s) work independently of
each other. However, if both mers are operang
and the Delay On me period is 30 minutes, the Delay
O Timer will override the Delay On Timer.