Specifications

24 Fan Convector Manual
Diagnosc Codes
This heater has the ability to check its own operaon connuously. If a fault occurs, an Error Message will ash
on the digital display of the control panel. This assists with diagnosing the fault, and may enable you to
overcome a problem without a service call. Please quote the code displayed when inquiring about service.
If you see other codes displayed, contact Rinnai or your nearest service agent and arrange for a service call.
NOTE
In some cases, you may be able to clear the Error Message simply by turning the heater OFF, then ON again. If
the Error Message sll remains or returns on the next operaon, contact Rinnai or your nearest service agent
and arrange for a service call.
FC510
FC824
CODE DISPLAYED DEFINITION REMEDY
Tilt Switch Acvated
Missed Ignion
Flame Failure
Overheat
Room Overheat
Power Cut
Inspector gas line connecon, aer seng heater
upright. Turn heater ON
Check gas is turned ON,
Service call if repeated
Venlate the room.
Service call if repeated.
Clean lter.
Service call if repeated.
Service call.
Turn Heater OFF, then ON again