Specifications

4 Fan Convector Manual
A licensed professional must install the appliance,
inspect it, and leak test it before use. The warranty
will be voided due to improper installaon.
The installer should have skills such as:
 gas sizing
 connecng gas lines and electricity
 knowledge of applicable naonal, state, and
local codes
If you lack these skills, contact a licensed professional.
Installaon Instrucons
Installaon Steps
General Instrucons .......................................... 4
Determine Installaon Locaon ........................ 6
Clearances .......................................................... 6
Gas Connecon .................................................. 7
Electricity ........................................................... 8
Checklist for Gas and Electricity ........................ 8
Final Checklist .................................................... 8
General Instrucons
Installer Qualicaons
DO NOT
 Do not obstruct the ow of combuson and
venlaon air.
 Do not use substute parts that are not authorized
for this appliance.
Type of installaon
 This appliance is equipped only for use with type of
gas indicated on the rang plate. This appliance is
not converble for use with other gases.
MUST DO
 The installaon must conform with local codes or,
in the absence of local codes, with the Naonal
Fuel Gas Code, ANSI Z223.1/NFPA 54, or the
Natural Gas and Propane Installaon Code, CSA
B149.1. If installed in a manufactured home, the
installaon must conform with the Manufactured
Home Construcon and Safety Standard, Title 24
CFR, Part 3280 and/or CAN/SCA Z240 MH Series,
Mobile Homes.
 The appliance, when installed, must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the Naonal Electrical
Code, ANSI/NFPA 70.
 The appliance and its appliance main gas valve
must be disconnected from the gas supply piping
system during any pressure tesng of that system
at test pressures in excess of 1/2 psi (3.5 kPa)
(13.84 in W.C.).
 You must follow the installaon instrucons and
those in Care and Maintenance for adequate
combuson air intake and exhaust.
INFORMATION
 Should overheang occur or the gas supply fail to
shut o, turn o the manual gas control valve to
the appliance.
 Keep the installaon locaon free of chemicals
such as cleaners that produce fumes. These fumes
can damage components and reduce the life of
your appliance.
 Do not spray aerosols near the heater while it is in
use. Many aerosols contain butane gas and can be
a re hazard. Use of aerosols, paint, polishes, etc.
while the heater is in use may also create odors as
well as irritate the eyes and sinuses.
This appliance is available in natural gas or propane
versions. The appliance cannot be eld converted
from one gas type to the other.
WARNING