I Series Solo Installation Manual

Rinnai I-Series Condensing Boiler Solo Manual

5. Press the Mode buon on the controller.

6. Press the (Up) or (Down) arrows unl appears in the display. Then, press the

Select buon.

8. The boiler is now set to allow higher exhaust temperatures. To exit parameter sengs and

enter normal operaon mode, press the Mode buon.

9. Replace the boiler’s front panel by reinserng the four screws that secure the panel.

7. Press the (Up) or (Down) arrows unl appears in the display. Then, press the

Select buon.

Select buon