I Series Solo Installation Manual

37
Rinnai I-Series Condensing Boiler Solo Manual
This boiler is equipped with a 2 in. PVC pipe connecon. With the use of a pipe reducer, installers
can use a 3 in. pipe for the combuson air and exhaust.
DO NOT apply PVC glues, solvents, or cleaners to the boiler’s combuson air or exhaust gasket
connecons. Failure to correctly assemble the components according to these instrucons may
result in property damage, personal injury, or death.
WARNING
Remove and discard the screw from the
combuson air vent connecon.
Remove and discard the combuson
air vent cap.
Install the combuson air vent pipe.
Ensure it is properly seated.
Secure the combuson air vent pipe to the
combuson air vent connecon with the
supplied screw.
Install the exhaust vent pipe. Ensure it is
properly seated.
Secure the exhaust vent pipe to the exhaust
adapter ring with the supplied screw.
Combuson Air Vent
Supplied
Exhaust Vent Pipe
Supplied