Installation Guide

Rinnai I-Series Condensing Boiler Combi Manual 73
To adjust the DHW setpoint temperature, follow the steps below.
20
PSI
20
PSI
Pri.
120
°F
Pri.
If the LED above the DHW buon is
not illuminated, press the DHW
buon.
If the LED above the DHW buon is
illuminated, proceed to Step 2.
Press the Switch Operaon
Mode buon unl the DHW
Acve icon appears on the
home screen.
Adjust the temperature with
the Up and Down arrows unl
the appropriate temperature is
displayed.
Press the Select buon to conrm
the temperature.
This temperature seng is
displayed for a few seconds and
then returns to standby mode.
104
°F
Pri.
LED
Pri.