Dimensions Guide
CONDENSING WALL-MOUNTED, GAS-FIRED SOLO BOILER
Models i060S, i090S, i120S, i150S
Appliance Type Wall-Mounted, Gas-Fired Solo Boiler
Installaon
Indoor
Gas Types Natural Gas (or Propane with eld conversion)
Standard
Features
• Outdoor Reset Control System with Sensor
• Modulang Wire Mesh Burner
• Stainless Steel Water Tube Condensing Heat
Exchanger
• Direct Vent Sealed Combuson
• Approved for Room and Closet Installaons
Included with
Purchase
• Condensing Gas Boiler
• Liquid Propane Field Conversion Kit
• Wall Mounng Bracket
• CH Pressure Relief Valve (30 PSI)
• Outdoor Temperature Sensor
• Vent Top with Integrated 2 in. PVC or 3 in. x 5 in.
Concentric Vent Adapter
• Documentaon: Installaon and Operaon Manual,
User Manual
Oponal
Accessories
Primary-Secondary Heang Kit (PN: 0783907),
Condensate Neutralizer, ScaleCuer, ScaleCuer Rell
Cartridge, and Isolaon Valve Kit
Venng
Opons
• Direct Vent (Concentric and Twin Pipe)
• Room Air
• Ubbink Flex Vent
• Materials: Polypropylene, Stainless Steel, PVC, CPVC
Refer to the “Rinnai I-Series Boiler Installaon and
Operaon Manual” for approved venng.
●
Measurements: in. (mm)
Maximum Equivalent Vent Lengths
Concentric, Twin Pipe, and Room Air:
Vent Sizes
• 2 in. PVC
• 2 in. (60 mm) PP
• 2 in. x 4 in. Concentric
• 3 in. PVC
• 3 in. (80 mm) PP
• 3 in. x 5 in. Concentric
Vent Lengths 65 (20 m) 150 (46 m)
Flex:
Vent Sizes 2 in. PP
Vent Lengths 50 (15 m)
45° elbow equivalent to 3 (1 m). 90° elbow equivalent to 6 (2 m).