Data Sheet

Warranty Conditions
1. This warranty applies to products which are manufactured on or after the date of
publication of this warranty but before the next date of publication of this warranty.
2. For Flued heaters: All terms of this warranty are eective from date of completion of
installation. The attending service person reserves the right to verify this date by
requesting a proof of purchase or a copy of the certicate of compliance prior to the
commencement of any warranty work. Where the date of completion of installation is
not known, this warranty will commence two months after the date of manufacture.
The date of manufacture is on the dataplate of the appliance.
Note: Certicates of compliance must be issued by the installer by law in all States
and Territories of Australia.
3. For Portable heaters: For portable heaters in ‘xed’ (non-portable) installations the
conditions for Flued heaters described in (1) above apply. In all other instances all
terms of this warranty are eective from date of purchase and the attending service
person reserves the right to verify this date by requesting a copy of the purchase
receipt prior to the commencement of any warranty work. Where the date of purchase
is not known, this warranty will commence two months after the date of manufacture.
The date of manufacture is on the dataplate of the appliance.
4. All Rinnai heating appliances must be installed, commissioned, serviced, repaired and
removed in accordance with the manufacturers installation instructions, current AS
3000, AS 3500 and AS 5601, local regulations and municipal building codes by
persons authorised by local regulations to do so.
5. All appliances must be operated and maintained in accordance with manufacturer’s
operating instructions.
6. Any inspection, service, repair or replacement activities associated with warranty on
Rinnai products must be authorised by Rinnai Australia before commencement.
Rinnai Heating Warranty 05
Denitions
Domestic Use:
The warranty periods in Table 1 that are allocated under “Domestic Use” are based on the
heating requirements of a typical domestic dwelling.
Commercial Use:
The warranty periods that are allocated under “Commercial Use” are for applications other
than domestic use and include premises such as commercial and industrial buildings,
hotels, motels, caravan parks, cafes, schools and sporting complexes, but not limited to
these.