Tech Bulletin
Technical Bullen 155 - Z-FLEX Z-DENS Venng for Rinnai Boilers
Manufacturer Listed and Tested Vent Products Telephone Fax Contact
Z-FLEX Z-DENS Polypropylene Venng System 603-669-5136 603-669-0309 www.z-ex.com
Pipe Lengths Elbows
2/4 Concentric
Terminaon
2/4 Concentric
Adapter
Locking Clamp,
Support Bracket
2ZDP212, 2ZDP212UV,
2ZDP224, 2ZDP224UV,
2ZDP236, 2ZDP236UV,
2ZDP272, 2ZDAP2
2ZDE245,
2ZDE245UV,
2ZDE287,
2ZDE287UV
2ZDCTH24,
2ZDCTV24
2ZDACLC2224 2ZDLC2, 2ZDFB2
Approved Vent Manufacturer
Approved 2 in. (60 mm) Z-DENS Polypropylene Vent Products (Item Numbers)
Purpose: To announce the approval of Z-DENS Polypropylene Venng by Z-FLEX for Rinnai Condensing Boilers.
Pipe Lengths Elbows
3/5 Concentric
Terminaon
3/5 Concentric
Adapter
Locking Clamp,
Support Bracket
2ZDP312, 2ZDP312UV,
2ZDP324, 2ZDP324UV,
2ZDP336, 2ZDP336UV,
2ZDP372, 2ZDAP3
2ZDE345,
2ZDE345UV,
2ZDE387,
2ZDE387UV
2ZDCTH35,
2ZDCTV35
2ZDACLC3335 2ZDLC3, 2ZDFB3
The installaon of the above components must conform to the Rinnai Installaon and Operaon Manual that is
shipped with the unit, local codes, or in the absence of local codes, with the Naonal Fuel Gas Code, ANSI
Z223.1/NFPA 54.
Approved 3 in. (80 mm) Z-DENS Polypropylene Vent Products (Item Numbers)
Turn page for maximum equivalent vent lengths.