Installation Manual

14 Rinnai M-Series Condensing Boiler Solo Manual
Using a Philips head screwdriver, remove
the 2 screws from the top of the boiler.
You Will Need:
• Philips head screwdriver
2
3
1
Li the tab slightly above the peg.
To remove, carefully li the panel up
and o to release it from the boiler.
IMPORTANT
Do not operate the boiler without the front panel installed. The front panel should
only be removed for service/maintenance or replacing internal components.
TIP
Be careful not to lose the screws. You’ll need
them when reinstalling the front cover.