Tech Bulletin
Technical Bullen 125 - ECCO Venng for M-Series Boilers
Manufacturer Listed and Tested Vent Products Telephone Fax Contact
ECCO
Manufacturing
ECCO Polypropylene Vent™ 877-955-4805 604-533-9335 www.eccomfg.com
Pipe Lengths Elbows
2/4 Concentric
Terminaon
2/4 Concentric
Adapter
Locking Clamp,
Support Bracket
190200, 190203,
190204, 190206
190211, 190212,
190213, 190214
190288
190295
190911
190220
190221
Approved Vent Manufacturer
Approved 2 in. (60 mm) ECCO Manufacturing Vent Products (Item Numbers)
Purpose: To announce the approval of ECCO Manufacturing venng system components as addional venng
opons for the following Rinnai M-Series Condensing Boilers:
Pipe Lengths Elbows
3/5 Concentric
Terminaon
3/5 Concentric
Adapter
Locking Clamp,
Support Bracket
190300, 190303,
190304, 190306
190311, 190312,
190313, 190314
190388
190395
190921
190320
190321
Maximum Equivalent Vent Lengths
The installaon of the above components must conform to the Rinnai Installaon and Operaon Manual that is shipped
with the unit, local codes, or in the absence of local codes, with the Naonal Fuel Gas Code, ANSI Z223.1/NFPA 54.
M060S, M060C, M090S M090C, M120S, M120C, M160S, M160C
Number of
90° Elbows
2 in. (60 mm)
Maximum
Vent Length
3 in. (80 mm)
Maximum
Vent Length
Number of
90° Elbows
2 in. (60 mm)
Maximum
Vent Length
3 in. (80 mm)
Maximum
Vent Length
0 60 (18.3) 150 (45.7) 0 30 (9.1) 140 (42.7)
1 54 (16.5) 144 (43.9) 1 24 (7.3) 134 (40.8)
2 48 (14.6) 138 (42.1) 2 18 (5.5) 128 (39.0)
3 42 (12.8) 132 (40.2) 3 12 (3.7) 122 (37.2)
4 36 (11.0) 126 (38.4) 4 6 (1.8) 116 (35.4)
5 30 (9.1) 120 (36.6) 5 N/A 110 (33.5)
6 24 (7.3) 114 (34.7) 6 N/A 104 (31.7)
• Each terminaon is equivalent to the length of pipe of the terminaon.
• The installer must determine the number of 90-degree elbows in the vent system (two 45-degree elbows
count as one 90-degree elbow). Refer to the table and guidelines above for maximum vent length based
on the number of elbows.
Rinnai America Corporaon • 103 Internaonal Drive, Peachtree City, GA 30269
Toll-Free: 1-800-621-9419 • Phone: 678-829-1700 • www.rinnai.us
©2018 Rinnai America Corporaon. Rinnai America Corporaon connually updates materials, and as such, content is subject to
change without noce. Local, state, provincial, federal and naonal fuel gas codes must be adhered to prior to and upon installaon.
Approved 3 in. (80 mm) ECCO Manufacturing Vent Products (Item Numbers)
Combi Models: M060C, M090C, M120C, M160C
Solo Models: M060S, M090S, M120S, M160S
Measurements shown in Ft (m).