Installation manual

Rinnai New Zealand Limited Neo Installation Manual: 11906-B
02-11
17
Mock chimney installaons
Clamping spacer
Flue cowl
Sealing collar
(not supplied)
Twin-skin flue
Outer flue 150 mm
Inner flue 100 mm
Any residual heat in the zero clearance box is ducted
away via the outer ue
3. Installing the heater into the replace
Carefully move the appliance into the enclosure ensuring the gas supply feeds into the rear
access hole and fasten heater to the replace with the four xings either side of the unit as
shown below.
50 mm
Bring the ue down within 50 mm of the unit and then
use the slip collar provided in the ue kit.