Installation manual
Rinnai New Zealand Limited Neo Installation Manual: 11906-B
02-11
26
Fascia assembly
Rear view of fascia
for reference
Posion of black screws
CAT cable
Fing the frame (steps 4 and 5), ensure you do not place excessive tension or pinch the CAT cable
4. Lift and slot the assembly over the top and swing down, the lower screws need to be
positioned over and inside the bottom ange.
5. Push the outer frame assembly into position and screw in place with the two screws
removed in step 1.
Commissioning
Complete the installation and commissioning checklist in the customer operation manual and
make sure you leave the manual with the customer.
Explain to the customer about the use and care of the unit and that they understand the
instructions.
Fing the frame assembly