Installation manual

Rinnai New Zealand Limited Neo Installation Manual: 11906-B
02-11
4
Specicaon
Description • Inbuilt gas space heater
• Burning log eect
• Glass front with glass dress guard
• Convection fan, top air discharge
Installation Inbuilt masonry, inbuilt mock chimney, and freestanding options
Combustion Method Bunsen type burner
Data Plate Inside appliance on the front left hand side
Flue - Masonry Rinnai strongly recommends the use of a Rinnai exiliner ue system (exi Ø 100 mm).
Failure to meet this criteria may result in an unsafe situation.
Installation without a exiliner ue is permissible as long as the chimney is checked for
soundness and ability to achieve a good draw. Terminal 240 mm x 45 mm rear discharge
(spigot).
Flue - Decorative
(mock chimney) and
Freestanding
Natural draft twin skin ue. An approved 100 mm cowl must be tted to all installations.
Decorative chimney installations require a Rinnai zero clearance box and zero clearance
ue kit.
Flue dimensions:
• Outer - 150 mm
• Inner - 100 mm
Gas Connection
½ " BSPT, the gas supply terminates inside the heater at the front lower right hand side
of the appliance
Gas Type NG and General Product LPG
Convection Fan 2-speed centrifugal, double diameter 160 x 180 mm
Heating Area • Up to 107 m
2
(NG)
• Up to 93 m
2
(ULPG)
Ignition Continuous spark electronic ignition
Input/Output
Input NG: 14-30 MJ/h
Input ULPG: 14-27 MJ/h
Output NG: 3.24-6.94 kW
Output ULPG: 2.98-6.04 kW
Noise Level 37-45 dB(A)
Power Consumption High 50 W
Standby <3 W
1500 mm cord is supplied with 3-pin plug on the rear left of the appliance
Safety Devices Overheat switch, electrical fuse, ame failure sensing system, and power failure
protection
Temperature Control
Manual models, manual control on unit
ETR models, thermostatic, temperature control range 7-32 °C
Thermal Eciency NG - 80.5%
ULPG - 80%
Eciency star rating: 4.10 stars
Weight 60 kg