User manual

Installation & Servicing Instructions Rinnai Q-Series

11.2Activatingfactorysettings(greenbuttonfunction)

To activate the factory settings again please follow the next procedure (Note: all altered

adjustments will be set back to the original factory settings that are accessible in the

current service level the boiler is in either user or 123):

- Select, when necessary, the technical read out;

- Select with the MODE-button chapter PARA;

- Press the STORE-button.

The word "Copy" will appear and factory settings are active again.

12 Isolatingtheboiler

Some situations require turning the entire boiler off.

By switching off the three buttons with the LED's for central heating, hot water and

pump program (

, or ), the boiler is switched off. Do not shut off the power

of the boiler, which means the circulation pump and the three-way valve are activated

once every 24 hours in order to prevent these parts from seizing up.

Intheeventoffrostdangerduringanisolatedboileritisadvisabletodrainthe

boilerand/ortheinstallation.

CAUTION