Installation manual

Rinnai Australia 1 Ultima II Operation Manual
ABOUT YOUR ULTIMA II
DESIGN LAYOUT
Control panel
STANDBY/ON button
Burner filter
Air inlet louvre
Warm air discharge louvre
Thermistor grill cover
Dress guard
NAVIGATING THE CONTROL PANEL
STANDBY / ON button - used to operate and
stop the heater.
ON / Combustion indicator - when GREEN
appliance is in standby, when RED the burner
is operating and when flashing RED there is a
fault.
UP / DOWN button - used to adjust the SET
temperature, clock and timers and operate the
lock function.
TEMP display -
CURR - indicates the current room
temperature.
SET - indicates the desired room
temperature programmed by the user.
Clock display - displays current time.
MODE display - indicates which mode the
heater is operating in.
SET button - used to programme the heater
operation.
DAY display - displays the current day.
AM/PM indicator - indicates AM or PM of
clock or timer settings.
TIMER display - when the word ‘TIMER’ is
shown the display panel will be showing
current timer settings.
TIMER button - operates timer functions.
PROGRAM display - when the word
‘PROGRAM’ is shown the heater is in
programming mode.
WEEKDAY/WEEKEND display - Indicates
whether the weekday or weekend timers are
being programmed.
AM/PM display - indicates whether AM and/
or PM timer settings are being programmed.
OVERRIDE button - operates the manual
override function.
FILTER display - when shown the filter(s)
require cleaning.
LOCK display - when shown the lock function
is activated.
6
214
5
3
7
1
2
3
4
5
6
7
su
i0:30 am
timer
GAS ECON
AM PM
AUTO OFF
11
10
20 18
16
25
1419
23
15
17
2
9
8
121324
2122
2
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25