Installation manual
Rinnai 8 RF1800 OIM
INSTALLATION SAFETY
WARNING
This appliance must be installed by a suitably qualied person in accordance with local codes and AS/
NZS 5601
This is primarily a decorative appliance and has not been designed as a space heater
This appliance has been tested to AS 4558
DO NOT operate this appliance without reading and understanding these instructions rst
This appliance is designed for installation into a timber framed construction and new or existing masonry
installations
NOT INTENDED FOR FIREPLACE INSERT
Only the approved ue components specied by Rinnai MUST BE used
This appliance must be installed into a well ventilated room in accordance with AS/NZS 5601
This appliance is designed for indoor installation only; NOT TO BE INSTALLED OUTDOORS
Rinnai is not responsible for incorrect or improper installations
All installations must be carried out by authorised personnel
Be sure to complete the installer details section of the user guide before signing off the installation
DO NOT place articles on or against this appliance
DO NOT store chemicals or ammable materials, or spray aerosols near this appliance
DO NOT operate with panels, covers or guards removed from this appliance.
DO NOT modify this appliance