User Guide

RH180 Manual 33
How to Use the Temperature Controller
Five temperature sengs are available. Push the up and down arrows to choose your desired temperature
seng. The number on the display corresponds to the temperatures below:
1=110°F
2=120°F
3=130°F
4=135°F
5=140°F
To display the recovery ow rate in gallons per minute through the unit (not to the xture), press the UP buon
for 3 seconds, followed by ON/OFF.
To display the temperature supplied to the storage tank in degrees Fahrenheit, press the DOWN buon for 3
seconds followed by ON/OFF.
(Note: temperature will display only one or two digits, Examples: 8 = 80 to 89 and 14 = 140 to 149)
Note: Freeze protecon will acvate as long as gas and electricity are available.
TEMPERATURE CONTROL