Installation Manual

2
HE+ Series Infrared Gas Heater Installation and Operation Manual
NOTICE:
This manual is current and correct for this product at time of manufacture. Occasional revision
of the product Certification Standard may require changes to the product and/or this manual.
This publication, or parts thereof, may not be reproduced in any form, without prior written con-
sent from Rinnai. Unauthorized use or distribution of this publication is strictly prohibited.
GENERAL INSTALLATION / OWNER’S MANUAL
A SUPPLEMENTARY MANUAL IS INCLUDED IN THE BURNER KIT FOR THE SPECIFIC MODEL
SAFETY ALERT:
Do not store or use gasoline or other flammable vapours and liquids in the
vicinity of this or any other gas fired appliance.
IF YOU SMELL GAS:
◼ Extinguish any open flame
◼ Do not attempt to light this or any other appliance
◼ Don’t touch any electrical switch, or telephone
◼ Immediately call your gas supplier from a neighbor’s phone
◼ Follow any and all instruction from your gas supplier
◼ If your gas supplier is not available, call the fire department
WARNING
FIELD CONVERTIBILITY:
This appliance is field convertible to LP gas.
Only use a kit available from Rinnai.
Follow instructions provided in the kit and
all local and national codes.
Keep this manual in a secure place .
Record for future reference:
Model #:
Serial #:
(located on heater rating label)
LOW INTENSITY TUBE TYPE INFRARED HEATER
WITH HIGH EFFICIENCY EC Motors
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation, operating and maintenance instruc-
tions thoroughly before installing or servicing this heater.
ANSI Z83.20-2016 • CSA 2.34-2016