Installation manual
– 34 –
FROST PROTECTION
■ This function allows a minimum room temperature to be pre-set, between 38°F and 60°F. Once the
Frost Protection function is selected the appliance will start heating whenever the room
temperature falls below the selected temperature, regardless of timer or manual settings.
■ In addition this function can be used to protect the elderly of infirm who may suffer from
hypothermia.
1
1
2
3
■ Follow the steps below to set and operate the Frost Protection:
Make sure the heater is turned OFF.
Press the “Frost” button. The
Frost Protection temperature
and the “Frost” indicator will be
displayed.
Press the “ ▲ ” and “ ▼ ”
buttons to select the Frost
Protection temperature.
(Between 38°F and 60°F).
When the “Frost” indicator is displayed the Frost Protection is operating, and will always prevent the
room temperature from falling below the pre-set Frost Protection temperature.
■ To turn off the Frost Protection:
Press the “Frost” button. The
“Frost” indicator will go out.
Set
Frost
pm
Tu
EcoFrost
Override
Auto ON/OFF
Set
Frost
pm
Tu
Programming
Clock TimerSelect
pm
Tu
EcoFrost
Override
Auto ON/OFF