Installation manual

Rinnai Australia 16 Slimfire 252 Operation & Installation Manual
FLUE INSTALLATION OPTIONS
Install the Rinnai rigid flue system components in accordance with the ‘Flueing Installation Manual For Rinnai
Flamefire Heaters’ that are provided with the flue kit.
The following diagrams illustrate the flue installation options that are available for the Slimfire 252
flame. Only the genuine Rinnai Flamefire (FLF) flue is certified as part of the Rinnai Slimfire 252
space heaters.
Only an authorised person must install, service and remove the Rinnai Slimfire 252 space heater
& flue system.
Only the flue system components described in the ‘Flueing Installation Manual For Rinnai
Flamefire Heaters’ that is provided with the flue kit must be used.
Components that are not described in that manual, whether manufactured by Rinnai or otherwise,
are not compatible and must not be used.
Rinnai appliance warranty conditions may be voided if non Rinnai flue components are fitted.
For masonry installation details refer to “MASONRY FLUE INSTALLATION” on page 17.
WARNING
Inbuilt
(Masonry)
Inbuilt
(Zero Clearance)
Direct flue Offset flue
FLFTWKIT
FLFHA5FLEX
FLFKIT05
NOTE