Operation Manual Split Type Wall Mounted Air Conditioner AUTO COOL DRY HEAT FAN SPEED TURBO HIGH MID LOW AUTO TIMER ON OFF SWING ON C F h SET ROOM OFF SWING SLEEP iClean HEALTH iFavor Anti-FUNGAS DISPLAY LOCK MODE FAN SWING TURBO TIMER FAV ROOM°C HEALTH SWING SLEEP CLEAN FRESH DISPLAY This appliance shall be installed in accordance with: • Manufacturer’s Installation Instructions • Current AS/NZS 5601 AS/NZS 3000 • Local Regulations and Municipal Building Codes including local OH&S requirement
This page is intentionally blank Rinnai i Split AC OM
TABLE OF CONTENTS Warnings and Important Information 1 Operation 4 Appliance Components �������������������������������������������������������������������������������������������������������������������������������������� 4 Remote Control Layout �������������������������������������������������������������������������������������������������������������������������������������� 5 Inserting Remote Control Batteries ���������������������������������������������������������������������������������������
WARNINGS AND IMPORTANT INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. IMPORTANT WARNING CAUTION Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNINGS: WHEN IGNORED, CAN RESULT IN SERIOUS INJURY OR DEATH. CAUTIONS: WHEN IGNORED, CAN RESULT IN MINOR INJURY OR PRODUCT DAMAGE. REGULATORY WARNING Installation or repairs made by unqualified persons can result in hazards to you and others.
WARNINGS AND IMPORTANT INFORMATION OPERATION WARNING DO NOT let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure. Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure. Do not use power cord rolled up. DO NOT place any objects on the power cord.
WARNINGS AND IMPORTANT INFORMATION INSTALLATION CAUTION Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure. Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure. Keep level even when installing the product. Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not inconvenience the neighbours.
OPERATION APPLIANCE COMPONENTS 1 2 3 INDOOR UNIT 6 4 MOD 5 FAN SWI SLE EP NG CLE AN ROO FRE M°C SH TUR HEA DIS BO LTH PLA TIM SWI AUT SPEE O COO TIME D TURBO L DRY R HIGH HEA ON OFF MID T FAN LOW SWING C AUTO SLEE F ON SET h Anti-FU P iClea OFF ROOM NGAS n DISPLAYHEALTH SWING iFav LOCK or E ER FAV NG Y 10 OUTDOOR UNIT 7 10 8 11 9 1. Internal unit air return inlet 2. Filter (located behind front access panel) 3.
OPERATION REMOTE CONTROL LAYOUT Main operation of the air conditioner is achieved conveniently with the remote control. 1. On / Off button Turns the power on/off. 2. Operation mode selection button Selects the operation mode: AUTO / COOLING / DRY (dehumidifying) / HEATING / FAN (fan only). 3. Temperature adjustment buttons Adjusts the room temperature when cooling and heating. 4. Fan speed button Adjusts the fan speed: AUTO / LOW /MEDIUM / HIGH. 5.
OPERATION INSERTING REMOTE CONTROL BATTERIES Insert batteries before using the remote control. The battery type used is AAA (1.5 V). 1. Remove the battery cover at the rear of the remote control. 2. Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly. 3. Reattach the battery cover. NOTE If the display screen of the remote control starts to fade or fails to transmit, replace the batteries.
OPERATION FAN ONLY This mode uses the appliances fan to circulates the indoor air without changing the room temperature. 1. Press to turn on the power. 2. Press the “MODE” button until “FAN” is shown on the LCD display screen. 3. Press the “FAN” button to adjust the fan speed (the available fan speeds are LOW / MID / HIGH). FAN SPEED The fan speed can be adjusted manually or set to automatic. 1.
OPERATION ADJUSTING THE HORIZONTAL AIR FLOW DIRECTION Continuous Circulation 1. To adjust the direction of the air flow horizontally for an even air circulation, press the “SWING↔” button once to enable a continuous cyclic movement of the vanes, when cycling “SWING↔” is shown on the LCD display screen. Fixed Direction AUTO COOL DRY HEAT FAN SPEED TURBO HIGH MID LOW AUTO TIMER ON OFF SWING ON C F h SET ROOM OFF SWING SLEEP iClean HEALTH iFavor Anti-FUNGAS DISPLAY LOCK 1.
OPERATION SLEEP MODE AUTO COOL DRY HEAT FAN SPEED TURBO HIGH MID LOW AUTO 1. Press to turn on the power. 2. Set the desired mode, temperature and fan setting as per basic operations 3. Press the “SLEEP” button once, “SLEEP” is shown on the LCD display screen: For Cooling: In cooling operation the “SLEEP” mode allows the set temperature to increase 1°C after 1 hour and another 1°C after an additional hour. For energy saving and comfort purposes.
OPERATION CLEANING OPERATION Cooling and dehumidifying operations, can generate moisture inside the appliance. If the appliance is not going to be used for a long period (in excess of one month), it is suggested to run the cleaning operation to remove dust and moisture and avoiding the odours. 1. With the appliance "OFF" press the “CLEAN” button once, “iClean” and CL are shown on the LCD display screen. 2.
CARE & MAINTENANCE GENERAL MAINTENANCE Component Description Interval Indoor unit Clean the Indoor unit outer surface by using a soft, dry cloth. Regularly Replace the remote control batteries. As needed or once per year Professional service Once per year Professional service Once per year Outdoor unit CAUTION Turn off the power and unplug the power cord before you perform any maintenance; otherwise it may cause electric shock.
CARE & MAINTENANCE SAVE A SERVICE CALL The air conditioner stops running. Check power supply or call Rinnai. If a power failure has occurred. Turn off the air conditioner when a power failure occurs. When the power is restored, wait 3 minutes, and then turn on the air conditioner. Check the air conditioner has not been turned off automatically by a programmed off timer. Press the power button on the remote control. The air conditioner does not generate cool / hot air. Air is not circulating properly.
WARRANTY Rinnai Air Conditioning Product Warranty NOTICE TO CONSUMERS UNDER AUSTRALIAN CONSUMER LAW Notice to consumers under the Australian Consumer Law: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
WARRANTY 4. WHAT WE NEED YOU TO DO We need you to assist us with your claim by: 5.
WARRANTY 6. EXCLUSIONS No warranties except those implied and that by law cannot be excluded are given by Rinnai in respect of Goods supplied. Where it is lawful to do so, the liability of Rinnai for a breach of a condition or warranty is limited to the repair or replacement of the Goods, the supply of equivalent Goods, the payment of the cost of repairing or replacing the Goods or acquiring equivalent Goods as determined by Rinnai.
INSTALLATION RECORD INSTALLER DETAILS Installers Name: _______________________________________________________________________ Company Name: _______________________________________________________________________ Company Address: ________________________________________________________________________ _______________________________________________________________________ ________________________________________________________________________ Company Contact Details Telephone: ________________________
CONTACTS Australia Pty. Ltd. ABN 74 005 138 769 Head Office 10-11 Walker Street, Braeside, Victoria 3195 Or 100 Atlantic Drive, Keysborough VIC 3173 Product Sales and Service - National Phone: 1300 555 545* Fax: 1300 555 565* Technical Helpline and Spare Parts National (Mon-Fri 8am - 5.30pm EST) Phone: 1300 555 545* Fax: 1300 300 141* *Cost of a local call higher from mobile or public phones. E-mail: enquiry@rinnai.com.au For further information visit: www.rinnai.com.
