Spec Sheet
Ubbink Vent Components - Concentric Non-Condensing
Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-829-1666 • www.rinnai.us
© 2017 Rinnai Corporation
Ubbink-VA-SP-20 1/2018
PLASTIC VENT COMPONENTS
• For concentric venting, non-condensing models.
• Current water heater models incorporate a condensate collector and do not require an “adapter” vent component. (For
models manufactured prior to 2008 a separate condensate collector is available)
• Plastic vent components consist of an outer plastic vent for the air intake (ø5”) and an inner metal vent for the exhaust
gases (Ø3”). Metal vent components consist of metal inner and outer vents.
• Plastic and metal vent components are completely interchangeable.
Refer to the Rinnai installation manual and the Ubbink installation instructions for complete installation details and
requirements.
Universal Non-Condensing Termination Kit
L”
(21” Non-Condensing Horizontal Termination Diverter
Kit)
Part No.: 223187
Vent Pipe Extension
Length “L” Part Number
10” 224051
19.5” 224052
39” 224053
L”
Rubber Wall Plate
Part No.: 710342 (White)
Part No.: 710602 (Black)
Roof Discharge Termination 18”
Part No.: 184118-S
39”
21”
2.3”
6.4”
45 Degree Elbow
Part No.: 224050
7.8”
7.2”
90 Degree Elbow
Part No.: 224063
4.9”
Ø0.78”
7.4”
22.3”
61.4”
Roof Discharge Termination
38”
(Cold Climate)
Part No.: 184119
Condensate Collector
Part No.: 224069
Telescoping Vent
Length
Part No.: 224054
Effective
Length
2.2-12 Inches
8.8”
Roof Termination
Extension Kit
Part No.: 185342
Termination Kit (termination,
elbow, rubber wall plates)
Termination Only
Length “L” Part Number Length “L” Part Number
8.7” 223191
11.5” 223181 11.5” 223183
21” 223182 21” 223184
(Plastic Outer Pipe, Metal Inner Pipe)