Tech Bulletin

ManualsBrandsRinnai ManualsTankless Gas Water HeatersRL94IP

TB-19 Revision A

11/2013

Technical Bulletin 019-Ubbink Parts List for Non-Condensing Water Heaters

Ubbink Vent Components - Concentric Non-Condensing

PLASTIC VENT COMPONENTS

 For concentric venting, non-condensing models.

 Current water heater models incorporate a condensate collector and do not require an “adapter” vent component. (For

models manufactured prior to 2008 a separate condensate collector is available)

 Plastic vent components consist of an outer plastic vent for the air intake (Ø5”) and an inner metal vent for the exhaust

gases (Ø3”). Metal vent components consist of metal inner and outer vents.

 Plastic and metal vent components are completely interchangeable.

Refer to the Rinnai Installation Manual and the Ubbink installation instructions for complete installation details and

requirements.

21”

Part No.: 223184

(21” Universal Non-Condensing Termination)

Part No.: 223182 (21” Universal Non-Condensing Termination Kit)

Part No.: 223181 (11.5” Universal Non-Condensing Termination Kit

Part No.: 223183

(11.5” Universal Non-Condensing Termination

11.5”

(21” Non-Condensing Horizontal Termination Diverter

Kit)

Part No.: 223187

Vent Pipe Extension

Length “L” Part Number

10” 224051

19.5” 224052

39” 224053

L”

Rubber Wall Plate

Part No.: 710342 (White)

Part No.: 710602 (Black)

Roof Discharge Termination 18”

Part No.: 184118-S

39”

21”

2.3”

6.4”

45 Degree Elbow

Part No.: 224050

7.8”

7.2”

90 Degree Elbow

Part No.: 224063

4.9”

Ø0.78”

7.4”

22.3”

61.4”

Roof Discharge Termination

38”

(Cold Climate)

Part No.: 184119

Condensate Collector

Part No.: 224069

Telescoping Vent

Length

Part No.: 224054

Effective

Length

2.2-12 Inches

8.8”

Roof Termination

Extension Kit

Part No.: 185342

Summary of content (2 pages)

PAGE 1
Technical Bulletin 019-Ubbink Parts List for Non-Condensing Water Heaters Ubbink Vent Components - Concentric Non-Condensing  For concentric venting, non-condensing models.  Current water heater models incorporate a condensate collector and do not require an “adapter” vent component. (For models manufactured prior to 2008 a separate condensate collector is available)  Plastic vent components consist of an outer plastic vent for the air intake (Ø5”) and an inner metal vent for the exhaust gases (Ø3”).
PAGE 2
Ubbink Vent Components - Concentric Non-Condensing METAL VENT COMPONENTS Roof Termination (Metal) Universal Termination Kit (Metal) Part No.: 184127 Part No.: 223188 12” 90 Degree Elbow (Metal) Part No.: 224255 Rubber Wall Plate Part No.: 710342 (White) Part No.: 710602 (Black) 21” 12” Universal Horizontal Termination (Metal) 39” 7.8” 8.8” 7.2” 6.4” L” Part No.: 224250 10” 224260 19.5” 224265 39” 224270 Part No.: 224245 7.4” 45 Degree Elbow (Metal) Part Number 4.9” 2.