Operation Manual Portable Room Air Conditioner Models: RPC26WA / RPC35WA / RPC41WA HIGH MID LOW COLL HEAT DRY FAN F This appliance shall be installed in accordance with: • Manufacturer’s Installation Instructions • Current AS/NZS 3000 • Local Regulations and Municipal Building Codes including local OH&S requirements This appliance must be installed, maintained and removed only by an Authorised Person.
BEFORE PROCEEDING WITH THE OPERATION OF YOUR NEW RINNAI PORTABLE ROOM AIR CONDITIONER PLEASE READ THIS MANUAL THOROUGHLY AND GAIN A FULL UNDERSTANDING OF THE REQUIREMENTS, FEATURES AND OPERATION OF YOUR NEW APPLIANCE.
TABLE OF CONTENTS Safety & Important Points 4 Warranty & Specifications 5 Unpacking the Appliance ������������������������������������������������������������������������������������������������������������������������������������ 5 Warranty ������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 Specifications ��������������������������������������������������������������������������������������
SAFETY & IMPORTANT POINTS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. IMPORTANT Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance. Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death. WARNINGS: WHEN IGNORED, CAN RESULT IN SERIOUS INJURY OR DEATH. CAUTIONS: WHEN IGNORED, CAN RESULT IN MINOR INJURY OR PRODUCT DAMAGE.
WARRANTY & SPECIFICATIONS UNPACKING THE APPLIANCE If any damage is evident DO NOT INSTALL or OPERATE and contact your supplier for advice. WARRANTY The benefits to the consumer given by this warranty are in addition to all other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
AIR CONDITIONER BASICS APPLIANCE COMPONENTS 1 2 HIGH MID LOW COLL HEAT DRY FAN F 7 C TIMER SLEEP SWING 8 9 10 6 3 Front 5 Back 4 11 12 13 14 20 15 19 18 17 16 1. Control panel 2. Cool air outlet 3. Receiver window 4. Remote control (Refer separate Remote Control Manual) 5. Exhaust outlet 6. Carry handles 7. Drain outlet 1 8. Drain outlet 2 (not used on this model) 9. Room air intake (filter located behind grill) 10. Lower air intake (filter located behind grill) 11.
AIR CONDITIONER BASICS CONTROL PANEL 21 22 HIGH MID LOW 23 24 25 26 COOL DRY C 27 TIMER SLEEP SWING FAN 21. Fan Speed Indicators 22. Fan Speed Button 23. Mode Indicators 24. Mode selection Button 25. Temperature Display 26. Temperature Buttons 27. Function Indicators 28. ON/OFF Button IMPORTANT 28 Before operating this appliance ensure that the location, installation and condensation requirements have been met, refer to installation instructions starting on page 11 for details.
OPERATION FAN 1. Press the ON/OFF button (28). 2. Press the mode button (24) until the FAN mode indicator is illuminated. 3. Use fan speed buttons (22) to select the desired fan speed (LOW, MED or HIGH). 4. Press the ON/OFF button (28) The most recent basic operational settings are stored in the appliances memory. NOTE If the appliance is not disconnected from the mains power supply then these setting will be available the next time the appliance is turned on via the ON/OFF button (28).
CARE & MAINTENANCE GENERAL MAINTENANCE It is recommended that after each cooling season the exterior panels and display of the appliance are cleaned with a soft damp cloth. 9 7 Air filters should be checked and cleaned every week during periods of heavy use. For intermittent use this can be extended to 2 to 3 weeks. 10 If storing the appliance for a prolong period remove the plugs and hoses from the drain outlets (7) , (8) and (12).
CARE & MAINTENANCE SAVE A SERVICE CALL SYMPTOM Appliance will not operate. POSSIBLE CAUSES POSSIBLE SOLUTIONS Not plugged into power. Plug into power. Power switch OFF. Switch power ON. Timer Function set. Wait or reset timer function. After switching off the appliance there may be a 3 minute delay before it may be re-started. Wait 3 minutes. Room temperature is lower than the set temperature. Adjust the set temperature to be lower than the room temperature. P1 appears on the display.
INSTALLATION LOCATION This portable air conditioner must be installed on a flat and dry surface. A minimum clearance of 500mm from walls or other appliances is required as well as easy access to a power point (GPO). HIGH MID LOW F C TIMER SLEEP SWING mm 500 500 mm The air outlets and the ducting system must not be obstructed. IMPORTANT COLL HEAT DRY FAN The appliance is fitted with a 1.2m flexible 2 pin cord 220-240V 50Hz 10A. mm 500 The maximum duct extension is 1.8m in total.
INSTALLATION EXHAUST DUCTING OPTIONS There are two ducting options available for this appliance, these are a Window installation or an optional Semipermanent wall installation. DO NOT over extend the exhaust duct. IMPORTANT Over extension of the exhaust duct can lead to kinking. Kinked ducting causes air flow restrictions and lowers the efficiency of the appliance. Keeping the exhaust duct as short as possible avoids this issue.
INSTALLATION SEMI-PERMANENT WALL INSTALLATION In some cases a window opening might not be assessable; therefore this appliance is supplied with semi-permanent wall flange kit that can be connected the Exhaust Duct. WARNING The positioning and installation of the wall flange should be completed by an authorised person and must comply with all municipal building codes and OH&S guidelines.
NOTES Rinnai 14 Portable Room AC OIM
NOTES Rinnai 15 Portable Room AC OIM
CONTACTS Australia Pty. Ltd. ABN 74 005 138 769 100 Atlantic Drive Keysborough, Victoria 3173 P.O. Box 460 Braeside, Victoria 3195 Product Sales & Service National Help Line Tel: 1300 555 545* Fax: 1300 555 655 *Monday to Friday, 8.00am to 5.30pm EST For further information visit www.rinnai.com.au or email enquiry@rinnai.com.au AU45204 Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance.
