User Manual

LOCATION

This portable air conditioner must be installed on a at and

dry surface. A minimum clearance of 500mm from walls or

other appliances is required as well as easy access to a

power point (GPO).

The air outlets and the ducting system must not be obstructed.

IMPORTANT

The appliance is tted with a 1.2m exible 2 pin

cord 220-240V 50Hz 10A.

The maximum duct extension is 1.8m in total.

Both factors are to be taken into account when

determining the location that the appliance will

be operated in.

DUCT ASSEMBLY

1. Place the Duct to Unit Adaptor (17) over the Exhaust Outlet (5), push it downwards to ensure it engages the

Exhaust Outlet tabs.

2. Screw one end of the Exhaust Duct (16) into the Duct to Unit Adaptor (17).

3. On the other end of the Exhaust Duct (16) x either the Window Exhaust Duct Adaptor (15) or the Wall

Exhaust Adaptor (18).

HIGH

MID

LOW

HEAT

DRY

FAN

COLL

TIMER

SLEEP

SWING

Front Back

18 17 16

500mm